CNC machining
in Ventura.
Milling, turning, and fabrication. From a single complex component to a production run.
Parts from our shop
Choose a part to see the material, machining, and finishing details.
Milled & turned component
Turning + 4-axis milling
Engraved, surfaced, and finished with hand-blended edges. This sample demonstrates a ±0.002″ tolerance.
Chemfilm finishGold-anodized aluminum
Turning + milling
Diamond knurling, milled slots, and a gold anodized finish on a 6061 aluminum part.
6061 aluminumTurned & milled component
Turning + 3-axis milling
A sample combining lathe work with 3-axis milling, with internal features and a detailed machined face.
Machined componentLiquid filtration component
Turning + 4-axis milling
A filtration-system component with a locking groove and deep-hole drilling using through-spindle and through-tool coolant.
316L stainless steelNavigation-system adapter
CNC turning + threading
An adapter for oil-field navigation equipment, turned and drilled on a lathe with internal, single-point threading.
Nitronic 60 stainlessStraight-knurled component
Turning + 4-axis milling
Straight knurling on a stainless steel component, combining lathe work and fourth-axis milling.
Stainless steelAll parts shown were made by M&M Machining. Specifications describe the individual examples.
Capabilities & equipment
The machines behind the work. Talk with Mark about the requirements of your part.
CNC milling
From intricate features to complex geometry, with 3-, 4-, and 5-axis capabilities.
| Machine | Capability |
|---|---|
| Mori Seiki SV-503 | 5-axis capability, 10,000 RPM |
| Haas VF-1 (2) | Vertical machining, 4th-axis capability |
| FNC-74 | 4th-axis capability, 7,500 RPM |
Through-tool, high-pressure coolant on the Mori SV-503.
CNC turning
Detailed turning, internal threading, and repeat production across a range of part sizes.
| Machine | Capability |
|---|---|
| Daewoo Puma 240L | Bar feed and parts catcher |
| Hitachi-Seiki 5NE-1100 | Oversize parts and heavy cutting |
| Haas SL-20 & Mini Lathe | CNC turning and production capability |
Equipment selected to suit the geometry and demands of your part.
Fabrication & design
Welding, drafting, modeling, and reverse engineering to help bring the complete job together.
| Machine | Capability |
|---|---|
| Lincoln IdealArc | TIG welding |
| CobraMIG 250 | Push/pull wire feed for aluminum |
| Linde 225 MIG | MIG welding |
Discuss drawings, models, and fabrication requirements directly with the shop.
It started with
a Haas lathe.
Mark Magana founded M&M Machining in 2004, after working in Ventura County machine shops since 1995.
That first Haas SL-20 was the beginning. Today, the shop combines CNC milling and turning with welding, fabrication, drafting, modeling, and reverse engineering.
M&M’s work supports aerospace, medical and laboratory equipment, liquid filtration, and oil-field navigation.
Talk to MarkLet’s look
at your part.
A drawing, a material, and a quantity give the shop a place to start.
Try the sample RFQ below. Add a drawing, fill in the details, and review the request. This demo keeps everything on your device.
- 1Your part
- 2Project details
- 3Review